aac55f7038
I2C_BOOTLOADER: Added support for error handling
2024-02-10 22:35:33 +00:00
a8c29aff9b
I2C_BOOTLOADER: Several fixes and a 4.5x performance increase as well as the addition of 16bit reads from the I2C_driver
2024-02-10 19:42:18 +00:00
be402aa8f7
Project: updated copyright notices and README and fixed a few spelling mistakes
2024-02-10 15:52:13 +00:00
1966ab78b4
Peripherals/I2C: Added a CPU I2C driver and wrote a bootloader that uses that to boot from an I2C eeprom
...
I'm happy to have reached 200 commits and with this, version v0.3.0 is functionally ready. I still need to do a fair bit of cleanup and bug fixing though before the actual release. With this commit I added a CPU I2C driver as well as a basic arbiter to have the hardware lcd controller and the software i2c communication pass through the same I2C driver and I2C bus. I also wrote a bootloader that reads code from an i2c eeprom to make sure the hardware works.
2024-02-09 23:30:58 +00:00
1d9be44c5a
Build system: renamed upload to upload_bitstream to allow for an upload_firmware in the future
2024-01-22 20:19:14 +00:00
8281c9a21f
FPGA_Board/OrangeCrab_r0.2.1: Switched the GPIO 0/1 pins for I2C to the dedicated ones
2023-12-10 04:37:07 +00:00
3e66336456
Build system: Small fixes and corrected rebuild when only the verilator testbench was changed
2023-12-09 02:39:14 +00:00
65dfd21ef0
Peripherals/I2C_driver: Uncommented code to check for device acknowledgment
2023-12-09 00:53:52 +00:00
94bc6eba39
Build system: Added help text and target mrproper which also deletes downloaded source code
2023-12-08 22:10:11 +00:00
533f346f9b
Build system: Added the ability to simulate an FPGA SoC and fixed all the warning verilator gave of the code previously used only for synthesis.
2023-12-07 16:39:04 +00:00
b1108e375d
Build system: Fixed standalone ./system/Makefile build and general Makefile improvements
2023-12-06 18:13:24 +00:00
df5b9c13ea
Project: Removed some unused verilator warning restrictions and a TODO comment
2023-12-06 02:46:39 +00:00
8edafd70cf
Build system: Improved the handling of seeds, moved most of the board specific build instructions to the board specific .mk file and fixed bios.asm dependencies
2023-12-05 21:46:56 +00:00
2fcc521f12
Peripherals/Wishbone_memory: Rewrote the module to be more efficient, smaller and also support byte level addressing. It is correct enough now to run code out of!
2023-12-05 02:50:21 +00:00
dd1080b42c
Build system: Added maximum CPU frequency to build system info and improved the way nextpnr seed is handled, fixing builds with older versions of make
2023-12-05 01:13:43 +00:00
26210be950
Peripherals/I2C_driver: Corrected the implementation of the bidirectional SDA pin, fixing the final yosys 0.35 warning
2023-12-04 22:40:53 +00:00
0eecfdcf40
Tools/Gen_litedram: Major improvements and cleanup including work in ensuring it is reproducible
2023-12-04 21:36:48 +00:00
8c921380bc
Peripherals/BuiltinRam: Fixed high impedance warning in yosys
2023-12-04 17:04:22 +00:00
374b1946e9
Added .keep file for intentionally empty directory
2023-12-03 19:30:59 +00:00
63ea29e399
Peripherals/Memory: Added support for the litedram DDR memory controller, created a new memory map and updated all relevant code and files including the addition of rudimentary wait state support for the cpu (BIU)
2023-12-03 19:24:39 +00:00
f1dc9d8a59
Processor/Instructions: Fixed a bug where if IN executed after a microcoded instruction the cpu would go into undefined behavior
2023-11-26 00:18:15 +00:00
f07e0e7c1f
Processor/Instructions: Added support for the IN <immediate> instruction. Also changed some stuff in system.v to add more devices in the IO/Memory space
2023-11-25 04:12:05 +00:00
17638d5cbd
Build system: Slight improvements, randomised nextpnr rng seed and printed it to the terminal. In case timing fails running it a bunch of times can yield one value that passes.
2023-11-23 23:27:19 +00:00
aedefddb5d
Project: The cpu finally works perfectly now even at full speed as far as i can tell! I made the ram and register writes synchronous which fixed the weird issues I had, then I added -abc9 to yosys so that nextpnr can actually route the cpu at full speed and increased the display fifo since the cpu is so fast now!!
2023-11-15 18:43:56 +00:00
29bc2e6d96
Project: Cleaned up some code and run the project through aspell
2023-11-15 14:37:46 +00:00
09ccce5f30
Peripherals/HD44780: Rewrote and cleaned up a lot of the driver code. Unfortunately what i think is a very weird bug in yosys is still affecting the codebase
2023-11-15 00:26:46 +00:00
2c8e8a9d9c
Added simple support for \n and \r on the HD44780 driver, increased the synthesised mem to fit brainfuck_compiled.asm and made it the default.
2023-11-12 21:39:27 +00:00
189b037bdf
Added proper line wrapping for HD44780 LCDs and rewrote half the driver to make it more flexible
2023-11-12 17:30:52 +00:00
618c3102d8
Fixed some dependencies on the makefiles
2023-11-12 13:30:12 +00:00
7d2cb5672f
Reduced numbers to be sorted in gnome_sort.asm to fit in lcd, fixed hlt on real hardware, slowed down cpu, increased lcd fifo and with that I almost got gnome_sort.asm working perfectly on real hardware
2023-11-12 07:31:05 +00:00
e06c0eeaa0
Made the build system simplify the microcode so that yosys understands and synthesises it! Now gnome_sort.asm almost works!
2023-11-12 04:04:56 +00:00
fa62b07c14
Removed probably unnecessary high impedance case yosys was complaining about in registers.v
2023-11-12 03:13:22 +00:00
f471b305d8
Switched some assignments in decode.v to non-blocking which fixed a seemingly unrelated bug with incrementing the accumulator, added some more working test code in colored_led.asm and did some semantic changes as per yosys suggestions
2023-11-12 02:54:41 +00:00
4c130a8d63
Added back removed warnings to verilator since we have now fixed those issues
2023-11-12 00:07:33 +00:00
09b3d51015
Added statistics to place&route
2023-11-09 23:10:06 +00:00
a88c420ca5
Added an I2C driver, a PCF8574 driver and an HD44780 display driver. Unfortunately this shows that even fibonacci doesn't run correctly. Nonetheless, I made colored_led.asm output text to the display!
2023-11-09 22:10:55 +00:00
1a1634c673
Updated README, improved fpga-specific makefile options and updated the version number
2023-11-07 14:37:22 +00:00
01dcbfa7a1
The CPU works on real hardware for the first time! I added an adjustment for ram size, added control for a led and a test program for it. On the fpga board there is an actual led there that I used to verify functionality
2023-11-06 08:13:36 +00:00
30ffa1b00c
Fixed a "combinatorial loop" and now if the build-in memory is reduced the design can be synthesized!
2023-11-06 05:36:04 +00:00
5ebd53b11c
fixed more driver conflicts
2023-11-06 01:35:48 +00:00
ae16c79b0a
Fixed another driver conflict
2023-11-05 20:18:11 +00:00
9947517693
Fixed simulation with icarus verilog and removed another driver conflict
2023-11-05 19:43:49 +00:00
4a5df9c74e
Fixed another driver conflict
2023-11-05 16:23:05 +00:00
aa9b7c0a50
Removed more "conflicting driver" issues with yet more performance penalties...
2023-11-04 15:33:23 +00:00
df2975fa09
Fixed a lot of "conflicting driver" issues but I had to roll back an optimisation
2023-11-04 11:04:22 +00:00
c7ddf3fa9e
More small fixes
2023-11-04 08:31:05 +00:00
694f708a32
Fixed some relatively low hanging fruit
2023-11-04 08:08:22 +00:00
934e2f5a36
Fixed a bunch of things wrong with fpga_top.v and gated off some more simulation-only code
2023-11-02 23:46:12 +00:00
08aac5c7b6
Removed some code that wasn't meant for synthesis and fixed important bug in Makefile
2023-11-02 22:19:15 +00:00
601397b7f0
Properly added fpga_top.v stuff in the build system and fixed some syntax errors
2023-11-02 22:00:07 +00:00
