|
|
af63ef1d68
|
Moved the decoder logic to decoder.v Now processor.v only connects the different modules
|
2023-05-27 23:35:00 +01:00 |
|
|
|
d2a98c02ff
|
Removed duplicate code and improved microcode entry
|
2023-05-27 17:59:52 +01:00 |
|
|
|
79d598fc64
|
Changed slogan and cleaned up some small pieces of code
|
2023-05-23 16:18:33 +01:00 |
|
|
|
e74d73ed58
|
Added reporting of branches on the stat json files and improved the plotting script
|
2023-05-21 03:00:27 +01:00 |
|
|
|
7db70d79ff
|
Made execute unit start at a state transition of a signal from the decoder thus allowing for an IPC of 0.99 !!
|
2023-05-17 21:30:21 +01:00 |
|
|
|
90f63b525d
|
Made the decode unit able to continuously decode (simple) instructions if BIU allows it
|
2023-05-17 20:09:38 +01:00 |
|
|
|
30c3deca37
|
Made the execute unit signal the end of execution by a state change rather than the state of a signal to allow for one cycle instructions
|
2023-05-17 11:05:20 +01:00 |
|
|
|
f914d1ec8f
|
Cleaned up processor.v a bit
|
2023-05-16 16:29:48 +01:00 |
|
|
|
97912b1a29
|
Fixed bug found by icarus verilog and added outdated notice to README
|
2023-05-16 13:59:16 +01:00 |
|
|
|
bfa576e2a0
|
Cleaned up the interface between BIU and the processor
|
2023-05-16 13:33:08 +01:00 |
|
|
|
07d2a80b2e
|
Added code to record statistics and a tool to plot them
|
2023-05-14 16:06:33 +01:00 |
|
|
|
df342467c7
|
Saved a clock cycle from microcode starts and added info in decode to allow saving a cycle on almost every instruction
|
2023-05-13 13:45:15 +01:00 |
|
|
|
00aa828ddc
|
Improved parallelism
|
2023-05-13 10:52:44 +01:00 |
|
|
|
fe0426a77b
|
Made execute unit run in parallel with everything else. Still not parallel for most of the time though
|
2023-05-13 06:51:35 +01:00 |
|
|
|
539fb8416b
|
Fixed copyright notices, did some major cleanup and bumped README's versions
|
2023-05-11 16:28:10 +01:00 |
|
|
|
a8ab6b2dc7
|
Separated the execution unit from decode
|
2023-05-11 12:22:49 +01:00 |
|
|
|
7724e5f383
|
Removed deprecated BIU_NEXT_POSITION
|
2023-05-10 08:53:29 +01:00 |
|
|
|
7e612bb701
|
made BIU snoop into the processor to deliver new instructions faster and fixed some bugs
|
2023-05-10 08:31:14 +01:00 |
|
|
|
b7bfbd4e33
|
Improved BIU performance and debug messages
|
2023-05-10 04:05:56 +01:00 |
|
|
|
da51dd6da7
|
First draft of a bus interface unit in an effort to make the CPU pipelined. Currently supports code prefetching
|
2023-05-07 13:34:15 +01:00 |
|
|
|
f4b22951d0
|
Cleaned up some pieces of code and fixed a bug
|
2023-05-04 00:49:04 +01:00 |
|
|
|
82baacfd5b
|
Fixed race condition giving garbage data on debug register write prints and ordering of reg write and instr fetch debug prints
|
2023-03-12 08:55:40 +00:00 |
|
|
|
11624ca2d2
|
Added the OUT instruction to be able to properly address I/O and moved printing logic to a device on the I/O space. Also added IRET which is basically just a RET in this case
|
2023-03-09 06:03:13 +00:00 |
|
|
|
9de83fd7c1
|
Added partial support for the software interrupt INT instruction
|
2023-03-08 07:26:28 +00:00 |
|
|
|
ba52ff89e6
|
Fixed most problems verilator's linter found
|
2023-03-04 06:22:28 +00:00 |
|
|
|
59ec1b7a15
|
Removed remnants of the old memory addressing system
|
2023-03-03 20:43:25 +00:00 |
|
|
|
e1bb98c0f0
|
Updated toolchain versions and run project through aspell
|
2023-03-03 06:54:33 +00:00 |
|
|
|
f60084344e
|
Overhauled cpu frontend. Made memory byte addressable (necessary), cleaned up state machine and fixed small bug with MOV
|
2023-03-03 06:29:06 +00:00 |
|
|
|
f7d76f1944
|
Removed useless state in the state machine and ran the project through aspell
|
2023-02-26 02:46:43 +00:00 |
|
|
|
5af6d720c3
|
Fixed ADD again and some memory read logic. Compiler runs the default brainfuck message program!!
|
2023-02-24 14:10:07 +00:00 |
|
|
|
355c673a37
|
Added a POP instruction
|
2023-02-24 11:31:15 +00:00 |
|
|
|
abee49d6c3
|
Implemented PUSH instruction, fixed register addressing bug and a RET bug
|
2023-02-24 07:32:27 +00:00 |
|
|
|
a189da249c
|
Added STOS instruction. Native brainfuck compiler started generating code!
|
2023-02-24 05:01:55 +00:00 |
|
|
|
e684db8348
|
Added support to CMP for compare memory to opcode parameter, added support for both PROC_DE_LOAD_?_PARAM and PROC_MEMIO_READ at the same command and associated changes
|
2023-02-24 02:18:48 +00:00 |
|
|
|
c4ac55d4c3
|
Implemented the RET instruction,fixed CALL bug, clarified MOD naming and usage
|
2023-02-23 14:48:48 +00:00 |
|
|
|
7fde422341
|
Added Microcode support, Stack, implemented the CALL instruction in microcode and grouped the wires on the decoder module
|
2023-02-22 01:28:23 +00:00 |
|
|
|
e6c9c722e3
|
Run the project through aspell and tweaked the README
|
2023-02-19 00:52:52 +00:00 |
|
|
|
fd4a9b5442
|
Fixed register addressing bug, mem read endianness, cleaned up code and added a provisional project logo
|
2023-02-19 00:20:53 +00:00 |
|
|
|
82bd859874
|
Moved the decoding of opcodes into a separate module and optimised memory reads
|
2023-02-17 18:08:09 +00:00 |
|
|
|
ded47555a5
|
Improved build system and project directory structure
|
2023-02-16 01:52:02 +00:00 |
|
