A CPU that aims to be binary compatible with the 8086 ISA, focused on optimisation and flexibility.
Go to file
2023-11-25 04:12:05 +00:00
boot_code Project: removed a .fst.hier file thought to be generated by gtkwave and added the type to gitignore 2023-11-15 00:32:40 +00:00
readme_files Made the temporary logo a bit more centered. Also removed an incorrect line in README 2023-10-24 01:08:13 +01:00
system Processor/Instructions: Added support for the IN <immediate> instruction. Also changed some stuff in system.v to add more devices in the IO/Memory space 2023-11-25 04:12:05 +00:00
tools Project: Cleaned up some code and run the project through aspell 2023-11-15 14:37:46 +00:00
.gitignore Project: removed a .fst.hier file thought to be generated by gtkwave and added the type to gitignore 2023-11-15 00:32:40 +00:00
8086_documentation.md Changed slogan and cleaned up some small pieces of code 2023-05-23 16:18:33 +01:00
common.mk Updated README, improved fpga-specific makefile options and updated the version number 2023-11-07 14:37:22 +00:00
COPYING Properly licensed the project and run it through aspell 2023-02-13 16:49:17 +00:00
gtkwave_savefile.gtkw Lots of cleanup mainly on processor.v 2023-06-01 02:13:55 +01:00
Makefile Added simple support for \n and \r on the HD44780 driver, increased the synthesised mem to fit brainfuck_compiled.asm and made it the default. 2023-11-12 21:39:27 +00:00
README.md Project: Cleaned up some code and run the project through aspell 2023-11-15 14:37:46 +00:00

9086 logo

A CPU that aims to be binary compatible with the 8086 ISA, focused on optimisation and flexibility.

Progress

  • 8086
    • Executing code
    • Is Turing complete
    • Can boot up MS-DOS / FreeDOS
    • Is completely binary compatible
    • Is pipelined
    • Is Out of Order
    • Is superscalar
    • Has been successfully synthesized
    • Has a comprehensive testing framework

Simulating it

Both Verilator and Icarus Verilog can be used for simulation. You can select which one you want with the SIM variable on ./common.mk. This list shows the software needed and the versions used during development :

  • Icarus Verilog : version 12.0 OR (preferred) Verilator : 5.016
  • bin86 : 0.16.21
  • GNU Make : 4.4.1
  • xxd : 2022-01-14
  • POSIX coreutils : GNU coreutils 9.4

After that you can run make on the top level directory and it should build everything and start the simulation

Synthesis and bitstream creation for FPGAs

You need to set FPGA_BOARD in ./common.mk to the name of a directory inside ./system/fpga_config/. You should also check inside your board directory for config.mk for further board-specific configuration options. Then you can run make upload in the top level directory and it should create the bitstream and upload it.

These are the currently supported FPGA boards:

  • OrangeCrab r0.2.1

This list shows the software needed and the versions used during development :

  • yosys : 0.35
  • bin86 : 0.16.21
  • GNU Make : 4.4.1
  • xxd : 2022-01-14
  • POSIX coreutils : GNU coreutils 9.4

Additionally, for ECP5 FPGAs:

  • prjtrellis : 1.4 ( database commit 4dda149b9e4f1753ebc8b011ece2fe794be1281a )
  • nextpnr : 0.6

Additionally, for FPGAs using the foboot bootloader

  • dfu-util : 0.11

High level design overview

9086 logo

All parts of this project and files in this repository are licensed under the GNU General Public License version 3 or later

Efthymios Kritikos is the copyright owner for all files except the following:

File Copyright owner Original license
system/fpga_config/OrangeCrab_r0.2.1/pin_constraint.pcf Greg Davill MIT

Version names

The version name consist of three numbers:

  1. The CPU that this version aims to be compatible with
  2. The specific milestone
  3. Patch level

For example v1.3.2 aims to support 80186 code, is on the fourth milestone and has 2 bug fixes since the milestone was reached. A "-dev" suffix denotes that the code is in the process to become that version, so in-between that and the previous.