571 lines
16 KiB
Verilog
571 lines
16 KiB
Verilog
/* processor.v - implementation of most functions of the 9086 processor
|
|
|
|
This file is part of the 9086 project.
|
|
|
|
Copyright (c) 2023 Efthymios Kritikos
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
`include "proc_state_def.v"
|
|
`include "alu_header.v"
|
|
`include "config.v"
|
|
`include "ucode_header.v"
|
|
|
|
module processor ( input clock, input reset, output reg [19:0] external_address_bus, inout [15:0] external_data_bus,output reg read, output reg write, output reg HALT,output reg ERROR);
|
|
|
|
/*if we don't read, output the register to have the bus stable by the write falling edge*/
|
|
reg [15:0] data_bus_output_register;
|
|
assign external_data_bus=read?data_bus_output_register:16'hz;
|
|
|
|
/*** Global Definitions ***/
|
|
|
|
reg [`PROC_STATE_BITS-1:0] state;
|
|
|
|
/*############ Decoder ########################################################## */
|
|
wire Wbit, Sbit, unaligning_instruction,opcode_size, has_operands;
|
|
wire [`PROC_STATE_BITS-1:0] next_state;
|
|
wire [2:0]RM;
|
|
wire [15:0]DE_PARAM1;// Input param1 form decoder to alu
|
|
wire [15:0]DE_PARAM2;
|
|
wire DE_ERROR,DE_HALT;
|
|
wire [3:0]DE_reg_read_port1_addr,DE_reg_write_addr,DE_reg_read_port2_addr;
|
|
wire [11:0]DE_REGISTER_CONTROL;
|
|
wire [4:0]INSTRUCTION_INFO;
|
|
wire [1:0]DECODER_SIGNALS;
|
|
wire [`UCODE_ADDR_BITS-1:0] ucode_seq_addr_entry;
|
|
|
|
reg SIMPLE_MICRO; /* otuput simple decodings (=0) or microcode data (=1) */
|
|
|
|
decoder decoder(
|
|
CIR,FLAGS,INSTRUCTION_INFO,DECODER_SIGNALS,next_state
|
|
,IN_MOD,RM,DE_PARAM1,DE_PARAM2
|
|
,in_alu1_sel1,in_alu1_sel2,OUT_MOD
|
|
,DE_REGISTER_CONTROL
|
|
,ALU_1OP
|
|
,ucode_seq_addr_entry,SIMPLE_MICRO,ucode_seq_addr
|
|
);
|
|
|
|
assign Wbit=INSTRUCTION_INFO[4:4];
|
|
assign Sbit=INSTRUCTION_INFO[3:3];
|
|
assign unaligning_instruction=INSTRUCTION_INFO[2:2];
|
|
assign opcode_size=INSTRUCTION_INFO[1:1];
|
|
assign has_operands=INSTRUCTION_INFO[0:0];
|
|
|
|
assign DE_reg_write_addr=DE_REGISTER_CONTROL[11:8];
|
|
assign DE_reg_read_port1_addr=DE_REGISTER_CONTROL[7:4];
|
|
assign DE_reg_read_port2_addr=DE_REGISTER_CONTROL[3:0];
|
|
|
|
assign DE_HALT=DECODER_SIGNALS[0:0];
|
|
assign DE_ERROR=DECODER_SIGNALS[1:1];
|
|
|
|
reg [`UCODE_ADDR_BITS-1:0] ucode_seq_addr;
|
|
|
|
/*############ REGISTERS ########################################################## */
|
|
|
|
reg [19:0] ProgCount; //TODO: do i create a lot of adders each place i increment it?
|
|
reg [15:0] CIR;
|
|
reg [15:0] PARAM1;
|
|
reg [15:0] PARAM2;
|
|
reg one_byte_instruction;
|
|
reg unaligned_access;
|
|
reg we_jumped; /*Only used to signify that a microcoded instruction jumped and we should not update the unaligned_access bit after the end of the instruction*/
|
|
|
|
reg [15:0]FLAGS;
|
|
|
|
reg [15:0] BYTE_WRITE_TEMP_REG;//we read 16bits here if we want to change just 8 and leave the rest
|
|
|
|
//Architectural Register file
|
|
reg [3:0] reg_write_addr;
|
|
wire [15:0] reg_write_data;
|
|
reg reg_write_we;
|
|
reg [3:0] reg_read_port1_addr;
|
|
reg [15:0] reg_read_port1_data;
|
|
reg [3:0] reg_read_port2_addr;
|
|
reg [15:0] reg_read_port2_data;
|
|
reg [1:0] reg_write_in_sel;
|
|
mux4 #(.WIDTH(16)) REG_FILE_WRITE_IN_MUX(
|
|
ALU_1O,
|
|
16'hz,
|
|
16'hz,
|
|
16'hz,
|
|
reg_write_in_sel,
|
|
reg_write_data);
|
|
register_file register_file(reg_write_addr,reg_write_data,reg_write_we,reg_read_port1_addr,reg_read_port1_data,reg_read_port2_addr,reg_read_port2_data);
|
|
|
|
/*############ ALU / Execution units ########################################################## */
|
|
// ALU 1
|
|
reg [1:0] in_alu1_sel1;
|
|
reg [1:0] in_alu1_sel2;
|
|
/* OUT_MOD : { EXTRA_FUNCTIONS_BIT[0:0], MOD_OR_EXTRA_FUNCTION[1:0] } */
|
|
reg [2:0] IN_MOD;
|
|
reg [2:0] OUT_MOD;
|
|
|
|
mux4 #(.WIDTH(16)) MUX16_1A(
|
|
/*0*/ PARAM1,
|
|
/*1*/ reg_read_port1_data,
|
|
/*2*/ {ProgCount[14:0],unaligned_access^unaligning_instruction},
|
|
/*3*/ 16'b0000000000000000, /*0 Constant*/
|
|
in_alu1_sel1,
|
|
ALU_1A);
|
|
|
|
mux4 #(.WIDTH(16)) MUX16_1B(
|
|
/*0*/ PARAM2,
|
|
/*1*/ reg_read_port2_data,
|
|
/*2*/ {ProgCount[14:0],unaligned_access^unaligning_instruction},
|
|
/*3*/ 16'b0000000000000000, /*0 Constant*/
|
|
in_alu1_sel2,
|
|
ALU_1B);
|
|
|
|
wire [15:0] ALU_1A;
|
|
wire [15:0] ALU_1B;
|
|
wire [15:0] ALU_1O;
|
|
reg [`ALU_OP_BITS-1:0]ALU_1OP;
|
|
wire [7:0] ALU_1FLAGS;
|
|
ALU ALU1(ALU_1A,ALU_1B,ALU_1O,ALU_1OP,ALU_1FLAGS,Wbit);
|
|
|
|
/*############ Processor state machine ########################################################## */
|
|
|
|
/*** RESET LOGIC ***/
|
|
always @(negedge reset) begin
|
|
if (reset==0) begin
|
|
@(posedge clock);
|
|
state=`PROC_HALT_STATE;
|
|
ucode_seq_addr=`UCODE_NO_INSTRUCTION;
|
|
ProgCount=0;//TODO: Reset Vector
|
|
HALT=0;
|
|
reg_write_we=1;
|
|
unaligned_access=0;
|
|
@(posedge reset)
|
|
@(negedge clock);
|
|
state=`PROC_IF_STATE_ENTRY;
|
|
one_byte_instruction=0;
|
|
ERROR=0;
|
|
SIMPLE_MICRO=0;
|
|
end
|
|
end
|
|
|
|
/*** Processor stages ***/
|
|
`define invalid_instruction state=`PROC_IF_STATE_ENTRY;ERROR=1;
|
|
|
|
always @(negedge clock) begin
|
|
case(state)
|
|
`PROC_IF_WRITE_CIR:begin
|
|
if(unaligned_access)begin
|
|
if(one_byte_instruction==1)begin /*TODO: have a read buffer so we can do this even with data reads */
|
|
CIR <= {CIR[7:0],external_data_bus[15:8]};
|
|
state=`PROC_DE_STATE_ENTRY;
|
|
end else begin
|
|
CIR[15:8] <= external_data_bus[7:0];
|
|
state=`PROC_IF_STATE_EXTRA_FETCH_SET;
|
|
end
|
|
end else begin
|
|
CIR <= external_data_bus;
|
|
ProgCount=ProgCount+1;
|
|
state=`PROC_DE_STATE_ENTRY;
|
|
end
|
|
end
|
|
`PROC_IF_STATE_EXTRA_FETCH:begin
|
|
CIR[7:0] <= external_data_bus[15:8];
|
|
state=`PROC_DE_STATE_ENTRY;
|
|
end
|
|
`PROC_EX_STATE_EXIT:begin
|
|
/*Don't update the unaligned_access for Instruction
|
|
* Fetch if we are doing microcode execution, it will
|
|
* be done by decode at the end*/
|
|
if (ucode_seq_addr==`UCODE_NO_INSTRUCTION)
|
|
unaligned_access=unaligning_instruction^unaligned_access;
|
|
case(OUT_MOD)
|
|
3'b000,
|
|
3'b001,
|
|
3'b010 : begin
|
|
case (RM) /* Duplicate code with write... */
|
|
3'b000:begin
|
|
/*[BX]+[SI]*/
|
|
`invalid_instruction
|
|
end
|
|
3'b001:begin
|
|
/*[BX]+[SI]*/
|
|
`invalid_instruction
|
|
end
|
|
3'b010:begin
|
|
/*[BP]+[SI]*/
|
|
`invalid_instruction
|
|
end
|
|
3'b011:begin
|
|
/*[BP]+[DI]*/
|
|
`invalid_instruction
|
|
end
|
|
3'b100:begin
|
|
/*[SI]*/
|
|
reg_read_port1_addr=4'b1110;
|
|
state=`PROC_MEMIO_WRITE;
|
|
end
|
|
3'b101:begin
|
|
/*[DI]*/
|
|
reg_read_port1_addr=4'b1111;
|
|
state=`PROC_MEMIO_WRITE;
|
|
end
|
|
3'b110:begin
|
|
/*d16 */
|
|
`invalid_instruction
|
|
end
|
|
3'b111:begin
|
|
/*[BX]*/
|
|
reg_read_port1_addr=4'b1011;
|
|
state=`PROC_MEMIO_WRITE;
|
|
end
|
|
endcase
|
|
end
|
|
3'b011:begin
|
|
reg_write_we=0;
|
|
if (ucode_seq_addr==`UCODE_NO_INSTRUCTION)
|
|
state=`PROC_IF_STATE_ENTRY;
|
|
else
|
|
state=`PROC_NEXT_MICROCODE;
|
|
end
|
|
3'b100:begin /*No output*/
|
|
if (ucode_seq_addr==`UCODE_NO_INSTRUCTION)
|
|
state=`PROC_IF_STATE_ENTRY;
|
|
else
|
|
state=`PROC_NEXT_MICROCODE;
|
|
end
|
|
3'b101:begin /* Program Counter*/
|
|
ProgCount={5'b00000,ALU_1O[15:1]};
|
|
unaligned_access=ALU_1O[0:0];
|
|
we_jumped=1;
|
|
if (ucode_seq_addr==`UCODE_NO_INSTRUCTION)
|
|
state=`PROC_IF_STATE_ENTRY;
|
|
else
|
|
state=`PROC_NEXT_MICROCODE;
|
|
end
|
|
3'b110:begin /* SP Indirect write*/
|
|
reg_read_port1_addr=4'b1100;
|
|
state=`PROC_MEMIO_WRITE;
|
|
end
|
|
default:begin
|
|
`invalid_instruction
|
|
end
|
|
endcase
|
|
end
|
|
`PROC_DE_LOAD_16_EXTRA_FETCH_SET:begin
|
|
external_address_bus = ProgCount;
|
|
state=`PROC_DE_LOAD_16_EXTRA_FETCH;
|
|
end
|
|
`PROC_MEMIO_READ_SETADDR:begin
|
|
external_address_bus = {5'b00000,reg_read_port1_data[15:1]};
|
|
state=reg_read_port1_data[0:0]?`PROC_MEMIO_GET_UNALIGNED_DATA:`PROC_MEMIO_GET_ALIGNED_DATA;
|
|
end
|
|
`PROC_MEMIO_PUT_BYTE:begin
|
|
BYTE_WRITE_TEMP_REG=external_data_bus;
|
|
state=`PROC_MEMIO_PUT_BYTE_STOP_READ;
|
|
end
|
|
`PROC_MEMIO_WRITE_EXIT:begin
|
|
write=0;
|
|
if (ucode_seq_addr==`UCODE_NO_INSTRUCTION)
|
|
state=`PROC_IF_STATE_ENTRY;
|
|
else
|
|
state=`PROC_NEXT_MICROCODE;
|
|
end
|
|
`PROC_MEMIO_PUT_ALIGNED_DATA:begin
|
|
read=1;
|
|
data_bus_output_register={ALU_1O[7:0],ALU_1O[15:8]};
|
|
state=`PROC_MEMIO_WRITE_EXIT;
|
|
end
|
|
`PROC_MEMIO_PUT_UNALIGNED_DATA:begin
|
|
BYTE_WRITE_TEMP_REG=external_data_bus;
|
|
state=`PROC_MEMIO_PUT_UNALIGNED_FIRST_BYTE;
|
|
end
|
|
`PROC_MEMIO_PUT_UNALIGNED_PREP_NEXT:begin
|
|
write=0;
|
|
state=`PROC_MEMIO_PUT_UNALIGNED_PREP_NEXT2;
|
|
data_bus_output_register={BYTE_WRITE_TEMP_REG[15:8],ALU_1O[7:0]};
|
|
end
|
|
`PROC_MEMIO_PUT_UNALIGNED_PREP_NEXT3:begin
|
|
BYTE_WRITE_TEMP_REG=external_data_bus;
|
|
state=`PROC_MEMIO_PUT_UNALIGNED_PREP_NEXT4;
|
|
end
|
|
`PROC_MEMIO_GET_SECOND_BYTE:begin
|
|
external_address_bus=external_address_bus+1;
|
|
state=`PROC_MEMIO_GET_SECOND_BYTE1;
|
|
end
|
|
`PROC_DE_LOAD_8_PARAM_UNALIGNED:begin
|
|
if({Sbit,Wbit}==2'b11)begin
|
|
PARAM1 = {{8{external_data_bus[15:15]}},external_data_bus[15:8]};
|
|
end else begin
|
|
PARAM1[7:0] = external_data_bus[15:8];
|
|
end
|
|
state=`PROC_EX_STATE_ENTRY;
|
|
end
|
|
default:begin
|
|
end
|
|
endcase
|
|
end
|
|
|
|
|
|
always @(posedge clock) begin
|
|
case(state)
|
|
`PROC_HALT_STATE:begin
|
|
end
|
|
`PROC_IF_STATE_ENTRY:begin
|
|
`ifdef DEBUG_PC_ADDRESS
|
|
/* Weird (possible bug) where even though the
|
|
* testbench stop the clock after ERROR gets
|
|
* raised the logic for the rising edge still
|
|
* gets triggered printing this debug message. */
|
|
if(ERROR!=1)
|
|
$display("Fetched instruction at %04x",{ProgCount[18:0],unaligned_access});
|
|
`endif
|
|
external_address_bus = ProgCount;
|
|
read = 0;
|
|
write = 1;
|
|
reg_write_we=1;
|
|
state=`PROC_IF_WRITE_CIR;
|
|
reg_write_in_sel=2'b00;
|
|
we_jumped=0;
|
|
end
|
|
`PROC_IF_STATE_EXTRA_FETCH_SET:begin
|
|
ProgCount=ProgCount+1;
|
|
external_address_bus = ProgCount;
|
|
state=`PROC_IF_STATE_EXTRA_FETCH;
|
|
end
|
|
`PROC_DE_STATE_ENTRY:begin
|
|
/* If we are unaligned, the address bus contains the
|
|
* ProgCount and points to the second word containing
|
|
* the nest unread byte in extenral_data_bus[7:0]. If
|
|
* we are aligned the address bus points to the first
|
|
* word of the instruction which contains no useful
|
|
* data anymore but the ProgCount has the correct
|
|
* address so update it now so that whatever the case
|
|
* external_data_bus contains at least some unknown data */
|
|
one_byte_instruction=(!has_operands)&&(!opcode_size);
|
|
external_address_bus = ProgCount;
|
|
if(SIMPLE_MICRO==0)begin
|
|
/* We cannot set these directly within
|
|
* microcode so don't overwirte useful values
|
|
* each time the next microcode is executed.
|
|
* Note this still allows to set initial values
|
|
* at the start of the microcode */
|
|
PARAM1=DE_PARAM1;
|
|
PARAM2=DE_PARAM2;
|
|
end
|
|
ERROR=DE_ERROR;
|
|
HALT=DE_HALT;
|
|
reg_read_port1_addr=DE_reg_read_port1_addr;
|
|
reg_read_port2_addr=DE_reg_read_port2_addr;
|
|
reg_write_addr=DE_reg_write_addr;
|
|
if ( (ucode_seq_addr==`UCODE_NO_INSTRUCTION) && (ucode_seq_addr_entry!=`UCODE_NO_INSTRUCTION) )begin
|
|
/*switch to microcode decoding*/
|
|
ucode_seq_addr=ucode_seq_addr_entry;
|
|
SIMPLE_MICRO=1;
|
|
/*keep state the same and rerun decode this time with all the data from the microcode rom*/
|
|
end else begin
|
|
state=next_state;
|
|
end
|
|
end
|
|
`PROC_DE_LOAD_REG_TO_PARAM:begin
|
|
PARAM2=reg_read_port2_data;
|
|
state=`PROC_EX_STATE_ENTRY;
|
|
end
|
|
`PROC_DE_LOAD_8_PARAM:begin
|
|
if(opcode_size==0)begin
|
|
if({Sbit,Wbit}==2'b11)begin
|
|
/*signed "16bit" read*/
|
|
PARAM1 = {{8{CIR[7:7]}},CIR[7:0]};
|
|
end else begin
|
|
PARAM1[7:0] = CIR[7:0];
|
|
end
|
|
state=`PROC_EX_STATE_ENTRY;
|
|
end else begin
|
|
if(unaligned_access==1)begin
|
|
if({Sbit,Wbit}==2'b11)begin
|
|
/*signed "16bit" read*/
|
|
PARAM1 = {{8{external_data_bus[7:7]}},external_data_bus[7:0]};
|
|
end else begin
|
|
PARAM1[7:0] = external_data_bus[7:0];
|
|
end
|
|
ProgCount=ProgCount+1;
|
|
state=`PROC_EX_STATE_ENTRY;
|
|
end else begin
|
|
external_address_bus=ProgCount;
|
|
state=`PROC_DE_LOAD_8_PARAM_UNALIGNED;
|
|
end
|
|
end
|
|
end
|
|
`PROC_DE_LOAD_16_PARAM:begin
|
|
if(opcode_size==0)begin
|
|
if(unaligned_access==1)begin
|
|
PARAM1 = {external_data_bus[7:0],external_data_bus[15:8]};
|
|
ProgCount=ProgCount+1;
|
|
end else begin
|
|
PARAM1 = {external_data_bus[15:8],CIR[7:0]};
|
|
end
|
|
case(IN_MOD)
|
|
3'b000,3'b001,3'b010: state=`PROC_MEMIO_READ;
|
|
default: state=`PROC_EX_STATE_ENTRY;
|
|
endcase
|
|
|
|
end else begin
|
|
ProgCount=ProgCount+1;
|
|
if(unaligned_access==1)begin
|
|
PARAM1[7:0] = external_data_bus[7:0];
|
|
state=`PROC_DE_LOAD_16_EXTRA_FETCH_SET;
|
|
end else begin
|
|
PARAM1 = {external_data_bus[7:0],external_data_bus[15:8]};
|
|
case(IN_MOD)
|
|
3'b000,3'b001,3'b010: state=`PROC_MEMIO_READ;
|
|
default: state=`PROC_EX_STATE_ENTRY;
|
|
endcase
|
|
end
|
|
end
|
|
end
|
|
`PROC_DE_LOAD_16_EXTRA_FETCH:begin
|
|
PARAM1[15:8] = external_data_bus[15:8];
|
|
case(IN_MOD)
|
|
3'b000,3'b001,3'b010: state=`PROC_MEMIO_READ;
|
|
default: state=`PROC_EX_STATE_ENTRY;
|
|
endcase
|
|
end
|
|
`PROC_MEMIO_READ:begin
|
|
/*Decode MOD R/M, read the data and place it to PARAM1*/
|
|
case (IN_MOD)
|
|
3'b000,
|
|
3'b001,
|
|
3'b010:begin
|
|
case (RM)
|
|
3'b000:begin
|
|
/*[BX]+[SI]*/
|
|
`invalid_instruction
|
|
end
|
|
3'b001:begin
|
|
/*[BX]+[SI]*/
|
|
`invalid_instruction
|
|
end
|
|
3'b010:begin
|
|
/*[BP]+[SI]*/
|
|
`invalid_instruction
|
|
end
|
|
3'b011:begin
|
|
/*[BP]+[DI]*/
|
|
`invalid_instruction
|
|
end
|
|
3'b100:begin
|
|
/*[SI]*/
|
|
reg_read_port1_addr=4'b1110;
|
|
state=`PROC_MEMIO_READ_SETADDR;
|
|
end
|
|
3'b101:begin
|
|
/*[DI]*/
|
|
reg_read_port1_addr=4'b1111;
|
|
state=`PROC_MEMIO_READ_SETADDR;
|
|
end
|
|
3'b110:begin
|
|
/*d16 */
|
|
`invalid_instruction
|
|
end
|
|
3'b111:begin
|
|
/*[BX]*/
|
|
reg_read_port1_addr=4'b1011;
|
|
state=`PROC_MEMIO_READ_SETADDR;
|
|
end
|
|
endcase
|
|
if(IN_MOD!=3'b000)begin
|
|
/*Actually check if 01 and add the 8bits or if 10 add the 16bits ....*/
|
|
`invalid_instruction;
|
|
end
|
|
end
|
|
3'b110:begin /* SP Indirect read*/
|
|
reg_read_port1_addr=4'b1100;
|
|
state=`PROC_MEMIO_READ_SETADDR;
|
|
end
|
|
default:begin
|
|
`invalid_instruction
|
|
end
|
|
endcase
|
|
|
|
end
|
|
`PROC_MEMIO_GET_ALIGNED_DATA:begin
|
|
PARAM2=(Wbit==1)? {external_data_bus[7:0],external_data_bus[15:8]} : {8'b00000000,external_data_bus[15:8]} ;
|
|
state=`PROC_EX_STATE_ENTRY;
|
|
end
|
|
`PROC_MEMIO_GET_UNALIGNED_DATA:begin
|
|
PARAM2={8'b00000000,external_data_bus[7:0]};
|
|
if(Wbit==1) begin
|
|
state=`PROC_MEMIO_GET_SECOND_BYTE;
|
|
end else begin
|
|
state=`PROC_EX_STATE_ENTRY;
|
|
end
|
|
end
|
|
`PROC_EX_STATE_ENTRY:begin
|
|
FLAGS[7:0] = ALU_1FLAGS[7:0]; //TODO, we should probably move all the ...STATE_EXIT stuff here
|
|
state=`PROC_EX_STATE_EXIT;
|
|
end
|
|
`PROC_MEMIO_WRITE:begin
|
|
/* ADDRESS: reg_read_port1_data DATA:ALU1_O */
|
|
`ifdef DEBUG_MEMORY_WRITES
|
|
$display("Writing at %04x , %04x",reg_read_port1_data,ALU_1O);
|
|
`endif
|
|
external_address_bus = {5'b00000,reg_read_port1_data[15:1]};
|
|
state = (Wbit==0) ? `PROC_MEMIO_PUT_BYTE : (reg_read_port1_data[0:0]?`PROC_MEMIO_PUT_UNALIGNED_DATA:`PROC_MEMIO_PUT_ALIGNED_DATA) ;
|
|
end
|
|
`PROC_MEMIO_PUT_BYTE_STOP_READ:begin
|
|
read=1;
|
|
state=`PROC_MEMIO_WRITE_EXIT;
|
|
if(reg_read_port1_data[0:0]==0)
|
|
data_bus_output_register={ALU_1O[7:0],BYTE_WRITE_TEMP_REG[7:0]};
|
|
else
|
|
data_bus_output_register={BYTE_WRITE_TEMP_REG[15:8],ALU_1O[7:0]};
|
|
end
|
|
`PROC_MEMIO_PUT_UNALIGNED_FIRST_BYTE:begin
|
|
read=1;
|
|
state=`PROC_MEMIO_PUT_UNALIGNED_PREP_NEXT;
|
|
data_bus_output_register={BYTE_WRITE_TEMP_REG[15:8],ALU_1O[7:0]};
|
|
end
|
|
`PROC_MEMIO_PUT_UNALIGNED_PREP_NEXT2:begin
|
|
external_address_bus=external_address_bus+1;
|
|
write=1;
|
|
read=0;
|
|
state=`PROC_MEMIO_PUT_UNALIGNED_PREP_NEXT3;
|
|
end
|
|
`PROC_MEMIO_PUT_UNALIGNED_PREP_NEXT4:begin
|
|
read=1;
|
|
state=`PROC_MEMIO_WRITE_EXIT;
|
|
data_bus_output_register={ALU_1O[15:8],BYTE_WRITE_TEMP_REG[7:0]};
|
|
end
|
|
`PROC_MEMIO_GET_SECOND_BYTE1:begin
|
|
PARAM2[15:8]=external_data_bus[15:8];
|
|
state=`PROC_EX_STATE_ENTRY;
|
|
end
|
|
`PROC_NEXT_MICROCODE:begin
|
|
read=0;
|
|
write=1; // maybe we are coming from MEMIO_WRITE
|
|
ucode_seq_addr=ucode_seq_addr_entry; /*Reused for next address*/
|
|
if( ucode_seq_addr == `UCODE_NO_INSTRUCTION )begin
|
|
/*Finished microcode*/
|
|
if(we_jumped==0)
|
|
unaligned_access=unaligning_instruction^unaligned_access;
|
|
SIMPLE_MICRO=0;
|
|
state=`PROC_IF_STATE_ENTRY;
|
|
end else begin
|
|
state=`PROC_DE_STATE_ENTRY;
|
|
end
|
|
reg_write_we=1;
|
|
end
|
|
default:begin
|
|
end
|
|
endcase
|
|
end
|
|
|
|
|
|
endmodule
|