cpu/Makefile

@@ -1,4 +1,4 @@
-SOURCES=processor.v testbench.v memory.v
+SOURCES=processor.v testbench.v
 VVP=processor.vvp
 
 .PHONY: run

cpu/boot_code.txt

@@ -1,17 +0,0 @@
-// 0x00000000
-55AA
-0000
-0000
-0000
-0000
-0000
-0000
-0000
-0000
-0000
-0000
-0000
-0000
-0000
-0000
-0000

cpu/gtkwave_savefile.gtkw

@@ -1,18 +1,18 @@
 [*]
 [*] GTKWave Analyzer v3.3.104 (w)1999-2020 BSI
-[*] Wed Feb  8 11:44:52 2023
+[*] Wed Feb  8 09:34:17 2023
 [*]
 [dumpfile] "/home/user/UNI_DATA/COMS30046_2022_TB-2/projects/9086/cpu/test.lx2"
-[dumpfile_mtime] "Wed Feb  8 11:44:20 2023"
-[dumpfile_size] 430
+[dumpfile_mtime] "Wed Feb  8 09:33:52 2023"
+[dumpfile_size] 362
 [savefile] "/home/user/UNI_DATA/COMS30046_2022_TB-2/projects/9086/cpu/gtkwave_savefile.gtkw"
 [timestart] 0
-[size] 1342 1059
+[size] 1630 1059
 [pos] -1 -1
-*-20.795050 2883000 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
+*-20.795050 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
 [treeopen] tb.
 [sst_width] 221
-[signals_width] 293
+[signals_width] 214
 [sst_expanded] 1
 [sst_vpaned_height] 313
 @28
@@ -20,11 +20,7 @@ tb.p.clock[0]
 tb.p.reset[0]
 tb.p.start[0]
 tb.p.state[1:0]
-tb.p.instruction_finished[0]
-@22
-tb.p.external_address_bus[19:0]
-tb.p.external_data_bus[15:0]
 @29
-tb.p.read[0]
+tb.p.instruction_finished[0]
 [pattern_trace] 1
 [pattern_trace] 0

cpu/memory.v

@@ -1,7 +0,0 @@
-module rom(input [19:0] address,output wire [15:0] data ,input rd,input cs);
-reg [15:0] memory [15:0];
-initial begin
-	$readmemh("boot_code.txt", memory);
-end
-assign data = !rd & !cs ? memory[address]: 'hz;
-endmodule

cpu/processor.v

@@ -52,22 +52,16 @@ end
 endmodule
 
 
-module processor ( input clock, input reset , output reg [19:0] external_address_bus, inout [15:0] external_data_bus,output reg read, output reg write);
-/* State */
+module processor ( input clock, input reset );
   reg [1:0] state;
   reg start=0;
   reg instruction_finished;
 
-/* Registers */
-reg [19:0] ProgCount;
-
-
   /* RESET LOGIC */
   always @(negedge reset) begin
     if (reset==0) begin
       @(posedge clock);
       state=0;
-		ProgCount=0;//TODO: Reset Vector
       #10
       start=1;
     end
@@ -92,13 +86,5 @@ always @(state) begin
 	  end
   end
 
-/* Processor stages */
-always @(state) begin
-	if (state==0) begin
-		external_address_bus <= ProgCount;
-		read <= 0;
-		write <= 1;
-	end
-end
 
 endmodule

cpu/testbench.v

@@ -2,17 +2,11 @@ module tb;
   wire clock;
   reg reset;
   reg  clk_enable;
-wire [19:0]address_bus;
-wire [15:0]data_bus;
-wire rd,wr,romcs;
 
-processor p(clock,reset,address_bus,data_bus,rd,wr);
-rom bootrom(address_bus,data_bus,rd,romcs);
+  processor p(clock,reset);
   
   clock_gen #(.FREQ(1000)) u1(clk_enable, clock);
 
-assign romcs=0;
-
   initial begin
     $dumpfile("test.lx2");
     $dumpvars(0,p);