boot_code/colored_led.asm

@@ -12,18 +12,6 @@ JNZ DELAY11
 
 MOV AL,#0x01
 out byte #0xB0
-MOV AL,#0x48
-out byte #0xA5
-MOV AL,#0x65
-out byte #0xA5
-MOV AL,#0x6c
-out byte #0xA5
-MOV AL,#0x6c
-out byte #0xA5
-MOV AL,#0x6f
-out byte #0xA5
-MOV AL,#0x20
-out byte #0xA5
 
 MOV DL,#0xF0
 DELAY21:

system/Makefile

@@ -66,7 +66,7 @@ else
 $(error invalid ECP5 device ${ECP5_DEVICE})
 endif
 
-ECP5_TARGETS=synth_ecp5.json synth_ecp5_out.config synth_ecp5.bit synth_ecp5.dfu synth_pnr_report.json
+ECP5_TARGETS=synth_ecp5.json synth_ecp5_out.config synth_ecp5.bit synth_ecp5.dfu
 ECP5_TARGETS+=abc.history # created from yosys
 
 EXTRA_SYNTHESIS_SOURCES=peripherals/I2C_driver.v peripherals/ascii_to_HD44780_driver.v peripherals/pcf8574_for_HD44780.v
@@ -78,8 +78,7 @@ synth_ecp5.json: ${SOURCES} ${TOP_LEVEL_SOURCE} fpga_config/${FPGA_BOARD}/fpga_t
 
 synth_ecp5_out.config:synth_ecp5.json
 	${QUIET_NEXTPNR}
-	${Q} nextpnr-ecp5 --Werror -q --json $< --textcfg $@ ${NEXTPNR_ECP5_DEV} --package ${ECP5_PACKAGE} --lpf fpga_config/${FPGA_BOARD}/pin_constraint.pcf --report=synth_pnr_report.json
+	${Q} nextpnr-ecp5 --Werror -q --json $< --textcfg $@ ${NEXTPNR_ECP5_DEV} --package ${ECP5_PACKAGE} --lpf fpga_config/${FPGA_BOARD}/pin_constraint.pcf
-	${Q}../tools/parse_nextpnr_stats.sh --brief synth_pnr_report.json
 
 synth_ecp5.bit:synth_ecp5_out.config
 	${QUIET_ECPPACK}

tools/parse_nextpnr_stats.sh

@@ -1,49 +0,0 @@
-#!/bin/sh
-set -eu
-
-if ! which jq &> /dev/null
-then
-	echo to get stastics, please install jq
-	exit 0
-fi
-
-REPORT_TYPE=brief
-
-if [ $# == 0 ]
-then
-	echo $0' [report type] <report json file>'
-	exit 1
-elif [ $# == 2 ]
-then
-	case "$1" in
-		"--brief")
-			REPORT_TYPE=brief
-			;;
-		*)
-			echo unkown parameter "\"$1\""
-			exit 1
-			;;
-	esac
-	REPORT=$2
-else
-	REPORT=$1
-fi
-
-if ! [ -e "$REPORT" ]
-then
-	echo file "\"${REPORT}\"" doesn\'t exist!
-	exit 1
-fi
-
-LUT_AVAIL=$(jq '.utilization.TRELLIS_COMB.available' "$REPORT" )
-LUT_USED=$(jq '.utilization.TRELLIS_COMB.used' "$REPORT" )
-FF_AVAIL=$(jq '.utilization.TRELLIS_FF.available' "$REPORT" )
-FF_USED=$(jq '.utilization.TRELLIS_FF.used' "$REPORT" )
-
-if [ "$REPORT_TYPE" == "brief" ]
-then
-	printf '\e[1;30m'
-	echo Luts $LUT_USED/$LUT_AVAIL \($(echo "($LUT_USED*100)/$LUT_AVAIL"|bc -l|grep -o '^.*\..')%\)
-	echo Flip Flops $FF_USED/$FF_AVAIL \($(echo "($FF_USED*100)/$FF_AVAIL"|bc -l|grep -o '^.*\..')%\)
-	printf '\e[0m'
-fi