Efthimis/9086
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 1 Wiki Activity

Cleaned up processor.v a bit

Browse Source
This commit is contained in:
(Tim) Efthimis Kritikos 2023-05-16 16:29:48 +01:00
parent aca3357cda
commit f914d1ec8f
2 changed files with 22 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
system/execute.v
View File

@ -79,7 +79,7 @@ always @(posedge valid_input) begin
end
end
always @(negedge set_initial_values) begin
always @( set_initial_values) begin
PARAM1 <= PARAM1_INIT;
PARAM2 <= PARAM2_INIT;
end

48
system/processor.v
View File

@ -26,7 +26,6 @@
`define PROC_STATE_BITS 3
`define PROC_RESET 3'b000
`define PROC_DE_STATE_ENTRY 3'b001
`define PROC_WAIT 3'b010
`define PROC_HALT 3'b011
//HALT: active high
@ -215,51 +214,36 @@ always @(posedge clock) begin
SIMPLE_MICRO <= 0;
proc_state <= `PROC_DE_STATE_ENTRY;
owe_set_init <= 0;
set_initial_values<=0;
end
`PROC_DE_STATE_ENTRY:begin
if(VALID_INSTRUCTION==1 || SIMPLE_MICRO == 1 ) begin
if( VALID_INSTRUCTION==1 || SIMPLE_MICRO == 1 ) begin
if(work==0) begin
DE_OUTPUT_sampled <= DE_OUTPUT;
if(SIMPLE_MICRO==0||owe_set_init==1)begin
valid_instruction_ack <= !valid_instruction_ack;
owe_set_init<=0;
set_initial_values<=0;
/* This runs at the start of the execution of an 8086 instruction */
`ifdef DEBUG_PC_ADDRESS
$display("Running command at %04x (%08x)",INSTRUCTION_LOCATION,INSTRUCTION);
`endif
`ifdef CALCULATE_IPC
new_instruction <= !new_instruction;
`endif
valid_instruction_ack <= !valid_instruction_ack;
owe_set_init<=0;
set_initial_values<= !set_initial_values;
ProgCount <= INSTRUCTION_LOCATION+{12'b0,instr_end};
INSTRUCTION_BUFFER<=INSTRUCTION[23:0];
end
if ( (ucode_seq_addr==`UCODE_NO_INSTRUCTION) && (ucode_seq_addr_entry!=`UCODE_NO_INSTRUCTION) )begin
/*switch to microcode decoding*/
/* switch to microcode decoding */
ucode_seq_addr <= ucode_seq_addr_entry;
SIMPLE_MICRO <= 1;
/*keep proc_state the same and rerun decode this time with all the data from the microcode rom*/
end else begin
/* This runs at the start of each execution cycle, with microcode this is more than once per 8086 instruction */
valid_exec_data <= 1;
proc_state <= `PROC_WAIT;
end
end else begin
if( DE_DEPENDS_ON_PREVIOUS == 0)
if ( (ucode_seq_addr==`UCODE_NO_INSTRUCTION) && (ucode_seq_addr_entry!=`UCODE_NO_INSTRUCTION) )begin
/*switch to microcode decoding*/
ucode_seq_addr <= ucode_seq_addr_entry;
SIMPLE_MICRO <= 1;
owe_set_init <= 1;
/*keep proc_state the same and rerun decode this time with all the data from the microcode rom*/
end
end
end
end
`PROC_WAIT:begin
set_initial_values<=1;
valid_exec_data<=0;
proc_state <= `PROC_DE_STATE_ENTRY;
if( SIMPLE_MICRO == 1 ) begin
ucode_seq_addr <= ucode_seq_addr_entry; /*Reused for next address*/
if( ucode_seq_addr_entry == `UCODE_NO_INSTRUCTION )begin
@ -268,6 +252,20 @@ always @(posedge clock) begin
end
end
end
end else begin
valid_exec_data <= 0;
if( DE_DEPENDS_ON_PREVIOUS == 0 )
if ( (ucode_seq_addr==`UCODE_NO_INSTRUCTION) && (ucode_seq_addr_entry!=`UCODE_NO_INSTRUCTION) && valid_exec_data==0 )begin
/*switch to microcode decoding*/
ucode_seq_addr <= ucode_seq_addr_entry;
SIMPLE_MICRO <= 1;
owe_set_init <= 1;
/*keep proc_state the same and rerun decode this time with all the data from the microcode rom*/
end
end
end else
valid_exec_data <= 0;
end
`PROC_HALT:begin
end
default:begin