diff --git a/gtkwave_savefile.gtkw b/gtkwave_savefile.gtkw index e968204..d06e700 100644 --- a/gtkwave_savefile.gtkw +++ b/gtkwave_savefile.gtkw @@ -1,15 +1,15 @@ [*] [*] GTKWave Analyzer v3.3.111 (w)1999-2020 BSI -[*] Tue May 16 18:44:13 2023 +[*] Wed May 31 20:14:37 2023 [*] [dumpfile] "/home/user/9086/system/boot_code.fst" -[dumpfile_mtime] "Tue May 16 18:40:53 2023" -[dumpfile_size] 205398 +[dumpfile_mtime] "Wed May 31 20:14:23 2023" +[dumpfile_size] 4718 [savefile] "/home/user/9086/gtkwave_savefile.gtkw" -[timestart] 24360000000 -[size] 1140 1003 +[timestart] 500000000 +[size] 1044 1003 [pos] -1 -1 -*-33.095047 38460000000 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 +*-32.495049 38460000000 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 [treeopen] TOP. [treeopen] TOP.system. [treeopen] TOP.system.p. @@ -33,22 +33,16 @@ TOP.system.p.write - @28 TOP.system.p.BIU.VALID_INSTRUCTION -TOP.system.p.valid_instruction_ack TOP.system.p.valid_exec_data -@29 TOP.system.p.execute_unit.next_exec +@23 +TOP.system.p.IF2DE_INSTRUCTION[31:0] @22 -TOP.system.p.execute_unit.INSTRUCTION_BUFFER[23:0] TOP.system.p.BIU.biu_state[3:0] @28 TOP.system.p.execute_unit.exec_state[3:0] -TOP.system.p.proc_state[2:0] TOP.system.p.BIU.write_request TOP.system.p.BIU.read_request -TOP.system.p.SIMPLE_MICRO -@22 -TOP.system.p.ucode_seq_addr[4:0] -@28 TOP.system.p.execute_unit.biu_jump_req @200 - @@ -58,7 +52,6 @@ TOP.system.IOMEM TOP.system.p.HALT @22 TOP.system.p.BIU.INSTRUCTION[31:0] -TOP.system.p.decoder.seq_addr_entry[4:0] TOP.system.p.BIU.FIFO_end[3:0] TOP.system.p.BIU.FIFO_start[3:0] TOP.system.p.BIU.INPUT_FIFO[0][7:0] diff --git a/system/biu.v b/system/biu.v index 6b4be68..8a10670 100644 --- a/system/biu.v +++ b/system/biu.v @@ -38,15 +38,34 @@ `define BIU_GET_SECOND_BYTE1 4'b1110 module BIU ( -/* Outside world */ input clock, input reset, output reg [19:0] external_address_bus, -/* */ inout [15:0] external_data_bus,output reg read, output reg write,output reg BHE,output reg IOMEM, -/* Internal */ output reg [31:0] INSTRUCTION, output reg VALID_INSTRUCTION, output reg [15:0] INSTRUCTION_LOCATION, input jump_req, -/* */ input[15:0] ADDRESS_INPUT, inout [15:0] DATA, input write_request, input read_request, input Wbit, output reg VALID_DATA, input MEM_OR_IO, -/* */ input valid_instruction_ack + + /***************** GENERAL *****************/ + /* */ input clock, input reset + + /**************** OUTSIDE WORLD ****************/ + /* */ ,output reg [19:0] external_address_bus + /* */ ,inout [15:0] external_data_bus,output reg read, output reg write,output reg BHE,output reg IOMEM + + /**************** OUTPUT TO DE ****************/ + /* */ ,output reg [31:0] INSTRUCTION, output reg VALID_INSTRUCTION, output reg [15:0] INSTRUCTION_LOCATION + /* */ ,output reg VALID_DATA, output reg DATA_DIR + + /**************** INPUT FROM DE ****************/ + ,input Wbit, input MEM_OR_IO, input valid_instruction_ack + + /**************** INPUT FROM EX ****************/ + /* */ ,input jump_req, input write_request, input read_request + /* */ ,input[15:0] ADDRESS_INPUT + + /************ BIDIRECTIONAL WITH EX ************/ + /* */ ,inout [15:0] DATA + `ifdef OTUPUT_JSON_STATISTICS -/* Statistics */ ,output wire [`L1_CACHE_SIZE-1:0] FIFO_SIZE_STAT, output wire VALID_INSTRUCTION_STAT + /***************** STATISTICS *****************/ + /* */ ,output wire [`L1_CACHE_SIZE-1:0] FIFO_SIZE_STAT, output wire VALID_INSTRUCTION_STAT `endif - ); + +); `ifdef OTUPUT_JSON_STATISTICS assign FIFO_SIZE_STAT = FIFO_SIZE; @@ -57,7 +76,6 @@ reg [15:0] data_bus_output_register; assign external_data_bus=read?data_bus_output_register:16'hz; reg [15:0] DATA_OUT; -reg DATA_DIR; assign DATA=DATA_DIR ? 16'hz:DATA_OUT; `define FIFO_SIZE_BYTES $rtoi($pow(2,`L1_CACHE_SIZE)) @@ -75,6 +93,10 @@ always @(negedge reset) begin end always @(posedge reset) begin biu_state <= `BIU_RESET; + /* verilator lint_off BLKSEQ */ + FIFO_start = `L1_CACHE_SIZE'b0; + /* verilator lint_on BLKSEQ */ + FIFO_end <= `L1_CACHE_SIZE'b0; end reg jump_req_latch; @@ -318,6 +340,7 @@ InstrSize fifoInstrSize2( always @( valid_instruction_ack ) begin /* verilator lint_off BLKSEQ */ FIFO_start = FIFO_start + {{`L1_CACHE_SIZE-3{1'b0}},Isize}; + /* verilator lint_on BLKSEQ */ INSTRUCTION_LOCATION <= INSTRUCTION_LOCATION + {13'd0,Isize}; `ifdef DOUBLE_INSTRUCTION_LOAD if(FIFO_SIZE>`L1_CACHE_SIZE'd3+{{`L1_CACHE_SIZE-3{1'b0}},Isize})begin @@ -340,7 +363,6 @@ always @( valid_instruction_ack ) begin VALID_INSTRUCTION <= 0; end else begin VALID_INSTRUCTION <= 0; - /* verilator lint_on BLKSEQ */ end `else VALID_INSTRUCTION <= 0; @@ -349,6 +371,7 @@ end always @( posedge jump_req ) begin jump_req_latch <= 1; + DATA_DIR <= 1; VALID_INSTRUCTION <= 0; end diff --git a/system/decoder.v b/system/decoder.v index b873e0d..1f5cd7d 100644 --- a/system/decoder.v +++ b/system/decoder.v @@ -24,34 +24,70 @@ `include "config.v" `define DE_STATE_BITS 2 -`define DE_RESET 2'b00 `define DE_STATE_ENTRY 2'b01 `define DE_HALT 2'b10 module decoder( - /* GENERAL */ input clock, input reset - /* INPUT FROM IF */ ,input wire [31:0] IF2DE_INSTRUCTION,input wire VALID_INSTRUCTION, input [15:0] INSTRUCTION_LOCATION - /* INPUT FROM EX */ ,input wire [7:0] EX2DE_FLAGS,input wire next_exec - /* OUTPUT TO EX */ ,output reg [`EXEC_STATE_BITS+`ERROR_BITS+65:0] DE_OUTPUT_sampled - /* */ ,output reg [15:0] ProgCount, output reg set_initial_values,output reg valid_exec_data - /* OUTPUT TO IF */ ,output reg VALID_INSTRUCTION_ACK + /***************** GENERAL *****************/ + /* Input from sys. */ input clock, input reset + /* Output to sys. */ ,output reg MEM_OR_IO_LATCHED, output reg [`ERROR_BITS-1:0] ERROR_LATCHED, output reg HALT_LATCHED + + /*************** INPUT FROM IF ***************/ + /* */ ,input wire [31:0] IF2DE_INSTRUCTION, input wire VALID_INSTRUCTION + /* */ ,input wire [15:0] INSTRUCTION_LOCATION + + /*************** OUTPUT TO IF ***************/ + /* OUTPUT TO IF */ ,output reg VALID_INSTRUCTION_ACK + + /*************** INPUT FROM EX ***************/ + /* */ ,input wire [7:0] EX2DE_FLAGS,input wire next_exec + + /*************** OUTPUT TO DE ***************/ + /* SYNC SIGNALS */ ,output reg set_initial_values, output reg valid_exec_data + /* INSTR. PARAMS */ ,output reg Wbit_LATCHED, output reg [2:0] IN_MOD_LATCHED, output reg [2:0] OUT_MOD_LATCHED, output reg [2:0] RM_LATCHED + /* DATA */ ,output reg [15:0] PARAM1_LATCHED, output reg [15:0] PARAM2_LATCHED,output reg [15:0] ProgCount + /* STATE CONTROL */ ,output reg [`EXEC_STATE_BITS-1:0] next_state_LATCHED + /* ALU CONTROL */ ,output reg [1:0] in_alu_sel1_LATCHED, output reg [1:0] in_alu_sel2_LATCHED,output reg [2:0] ALU_OP_LATCHED + /* OTHER */ ,output reg memio_address_select_LATCHED + + /************* OUTPUT TO REGISTERS ************/ + /* */ ,output reg [3:0] reg_write_addr_LATCHED, output reg [3:0] reg_read_port2_addr_LATCHED, output reg [3:0] reg_read_port1_addr_LATCHED + `ifdef CALCULATE_IPC - /* STATISTICS */ ,output reg new_instruction + /* STATISTICS */ ,output reg new_instruction `endif + ); reg SIMPLE_MICRO; /* use simple decodings (=0) or microcode data (=1) */ wire [`UCODE_ADDR_BITS-1:0] ucode_seq_addr_entry; reg [`UCODE_ADDR_BITS-1:0] ucode_seq_addr; wire DEPENDS_ON_PREVIOUS; -wire [`EXEC_STATE_BITS+`ERROR_BITS+65:0] DE_OUTPUT; wire set_params; +wire MEM_OR_IO, HALT,Wbit,memio_address_select; +wire [1:0] in_alu_sel1,in_alu_sel2; +wire [2:0] IN_MOD,OUT_MOD,RM,ALU_OP; +wire [3:0] reg_write_addr,reg_read_port2_addr,reg_read_port1_addr; +wire [15:0] PARAM1,PARAM2; +wire [`EXEC_STATE_BITS-1:0] next_state; +wire [`ERROR_BITS-1:0] ERROR; + instruction_decode instruction_decode( - /* INPUT */ IF2DE_INSTRUCTION,{8'h0,EX2DE_FLAGS}, - /* MICROCODE */ ucode_seq_addr_entry,SIMPLE_MICRO,ucode_seq_addr, - /* OUTPUT */ DE_OUTPUT,DEPENDS_ON_PREVIOUS, set_params - ); + /* INPUT */ IF2DE_INSTRUCTION,{8'h0,EX2DE_FLAGS} + /* MICROCODE */ ,ucode_seq_addr_entry,SIMPLE_MICRO,ucode_seq_addr + /* OUTPUT */ ,DEPENDS_ON_PREVIOUS, set_params, MEM_OR_IO,ERROR, HALT + + /*************** INPUT FROM DE ***************/ + /* INSTR. PARAMS */ ,Wbit, IN_MOD, OUT_MOD, RM + /* DATA */ ,PARAM1, PARAM2 + /* STATE CONTROL */ ,next_state + /* ALU CONTROL */ ,in_alu_sel1,in_alu_sel2, ALU_OP + /* OTHER */ ,memio_address_select + + /***************** REGISTERS *****************/ + /* */ ,reg_write_addr, reg_read_port2_addr, reg_read_port1_addr +); reg [`DE_STATE_BITS-1:0] de_state; @@ -61,15 +97,25 @@ always @(negedge reset) begin `ifdef CALCULATE_IPC new_instruction<=0; `endif -end -always @(posedge reset) begin - de_state <= `DE_RESET; - /* need early init */ - VALID_INSTRUCTION_ACK <= 0; + valid_exec_data<=0; instant_response <= 0; stalled_response <= 0; end +always @(posedge reset) begin + de_state <= `DE_STATE_ENTRY; + /* need early init */ + ucode_seq_addr <= `UCODE_NO_INSTRUCTION; + SIMPLE_MICRO <= 0; + owe_set_init <= 0; + set_initial_values<=0; + wait_exec<=0; + first_ucode <= 0; + HALT_LATCHED <= 0; + ERROR_LATCHED <= `ERROR_BITS'h0; + VALID_INSTRUCTION_ACK <= 0; +end + wire [2:0] instr_end; InstrSize InstrSize({IF2DE_INSTRUCTION[31:24],IF2DE_INSTRUCTION[21:19]},instr_end); @@ -96,8 +142,24 @@ end reg first_ucode; always @(instant_response or stalled_response) begin - DE_OUTPUT_sampled <= DE_OUTPUT; - + //`define LATCH(VAR) VAR_LATCHED <= VAR; //TODO would this work? + IN_MOD_LATCHED <= IN_MOD; + OUT_MOD_LATCHED <= OUT_MOD; + RM_LATCHED <= RM; + MEM_OR_IO_LATCHED <= MEM_OR_IO; + PARAM1_LATCHED <= PARAM1; + PARAM2_LATCHED <= PARAM2; + ALU_OP_LATCHED <= ALU_OP; + in_alu_sel1_LATCHED <= in_alu_sel1; + in_alu_sel2_LATCHED <= in_alu_sel2; + reg_read_port1_addr_LATCHED <= reg_read_port1_addr; + reg_read_port2_addr_LATCHED <= reg_read_port2_addr; + reg_write_addr_LATCHED <= reg_write_addr; + Wbit_LATCHED <= Wbit; + ERROR_LATCHED <= ERROR; + HALT_LATCHED <= HALT; + next_state_LATCHED <= next_state; + memio_address_select_LATCHED <= memio_address_select; if ( (ucode_seq_addr==`UCODE_NO_INSTRUCTION) && (ucode_seq_addr_entry!=`UCODE_NO_INSTRUCTION) )begin /* switch to microcode decoding */ @@ -138,17 +200,6 @@ end always @(posedge clock) begin case(de_state) - `DE_RESET:begin - ucode_seq_addr <= `UCODE_NO_INSTRUCTION; - DE_OUTPUT_sampled <= 0; - SIMPLE_MICRO <= 0; - de_state <= `DE_STATE_ENTRY; - owe_set_init <= 0; - set_initial_values<=0; - wait_exec<=0; - valid_exec_data<=0; - first_ucode <= 0; - end `DE_STATE_ENTRY:begin if ( ( VALID_INSTRUCTION==1 || SIMPLE_MICRO == 1 ) && wait_exec==0) begin stalled_response <= !stalled_response; @@ -164,12 +215,12 @@ end endmodule -/************************ Instruction specific decoding **********************************/ +///////////////////////// Instruction specific decoding /////////////////////////////////// module microcode( - input [`UCODE_ADDR_BITS-1:0] ADDR, - output [`UCODE_DATA_BITS-1:0] DATA + input [`UCODE_ADDR_BITS-1:0] ADDR + ,output [`UCODE_DATA_BITS-1:0] DATA ); initial begin @@ -189,64 +240,25 @@ assign DATA=ucode_rom[ADDR]; endmodule module instruction_decode( - /* INPUTS */ input wire [31:0] INSTRUCTION,input wire [15:0] FLAGS - /* MICROCODE */ ,output reg [`UCODE_ADDR_BITS-1:0] seq_addr_entry, input wire SIMPLE_MICRO, input wire [`UCODE_ADDR_BITS-1:0] seq_addr_input - /* OUTPUT */ ,output wire [`EXEC_STATE_BITS+`ERROR_BITS+65:0] OUTPUT, output reg DEPENDS_ON_PREVIOUS, output reg set_params + /* INPUTS */ input wire [31:0] INSTRUCTION,input wire [15:0] FLAGS + /* MICROCODE */ ,output reg [`UCODE_ADDR_BITS-1:0] seq_addr_entry, input wire SIMPLE_MICRO, input wire [`UCODE_ADDR_BITS-1:0] seq_addr_input + /* OUTPUT */ ,output reg DEPENDS_ON_PREVIOUS, output reg set_params,output reg MEM_OR_IO, output reg [`ERROR_BITS-1:0] ERROR, output reg HALT + + /*************** INPUT FROM DE ***************/ + /* INSTR. PARAMS */ ,output reg Wbit, output reg [2:0] IN_MOD, output reg [2:0] OUT_MOD, output reg [2:0] RM + /* DATA */ ,output reg [15:0] PARAM1, output reg [15:0] PARAM2 + /* STATE CONTROL */ ,output reg [`EXEC_STATE_BITS-1:0] next_state + /* ALU CONTROL */ ,output reg [1:0] in_alu_sel1, output reg [1:0] in_alu_sel2,output reg [2:0] ALU_OP + /* OTHER */ ,output reg memio_address_select + + /***************** REGISTERS *****************/ + /* */ ,output reg [3:0] reg_write_addr, output reg [3:0] reg_read_port2_addr, output reg [3:0] reg_read_port1_addr ); /* DEPENDS_ON_PREVIOUS - This encodes weather the instruction requires the previous to be finished in order to be decoded. This, for example, affects * conditional jumps since flags are checked during decode. */ -reg [2:0]IN_MOD; -assign OUTPUT[2:0] = IN_MOD; - -reg [2:0]RM; -assign OUTPUT[5:3] = RM; - -reg memio_address_select; -assign OUTPUT[6:6] = memio_address_select; - -reg MEM_OR_IO; -assign OUTPUT[7:7] = MEM_OR_IO; - -reg [15:0] PARAM1; -assign OUTPUT[23:8] = PARAM1; - -reg [15:0] PARAM2; -assign OUTPUT[39:24] = PARAM2; - -reg [2:0]ALU_OP; -assign OUTPUT[42:40] = ALU_OP; - -reg [1:0]in_alu_sel1; -assign OUTPUT[44:43] = in_alu_sel1; - -reg [1:0]in_alu_sel2; -assign OUTPUT[46:45] = in_alu_sel2; - -reg [2:0]OUT_MOD; -assign OUTPUT[49:47] = OUT_MOD; - -reg [3:0]reg_read_port1_addr; -assign OUTPUT[53:50] = reg_read_port1_addr; - -reg [3:0]reg_read_port2_addr; -assign OUTPUT[57:54] = reg_read_port2_addr; - -reg [3:0]reg_write_addr; -assign OUTPUT[61:58] = reg_write_addr; - -reg Wbit,Sbit,opcode_size; -assign OUTPUT[64:62] = {Wbit,Sbit,opcode_size}; - -reg [`ERROR_BITS-1:0] ERROR; -reg HALT; -assign OUTPUT[`ERROR_BITS+65:65]={ERROR,HALT}; - -reg [`EXEC_STATE_BITS-1:0] next_state; -assign OUTPUT[`EXEC_STATE_BITS+`ERROR_BITS+65:`ERROR_BITS+66] = next_state; - /* verilator lint_off UNUSEDSIGNAL */ wire [`UCODE_DATA_BITS-1:0] ucode_data; /* verilator lint_on UNUSEDSIGNAL */ @@ -269,10 +281,12 @@ reg [1:0] PARAM_ACTION; `define LOAD_8 2'b01 `define LOAD_16 2'b10 +reg Sbit,opcode_size; + // I use blocking for basically putting names on the different fields of INSTRUCTION and // then branching off of that instead of the raw bits. otherwise the code // would be identical -// verilator lint_off BLKSEQ +/* verilator lint_off BLKSEQ */ always @( FLAGS or INSTRUCTION or SIMPLE_MICRO or seq_addr_input ) begin set_params = 1; PARAM_ACTION = `NO_LOAD; @@ -1009,7 +1023,7 @@ end `undef invalid_instruction endmodule -// verilator lint_on BLKSEQ +/* verilator lint_on BLKSEQ */ /* IN: {INSTRUCTION[31:24],INSTRUCTION[21:19]} */ diff --git a/system/execute.v b/system/execute.v index 05caba7..344e9dd 100644 --- a/system/execute.v +++ b/system/execute.v @@ -22,22 +22,43 @@ `include "error_header.v" module execute_unit ( - /* GENERAL */ input clock, input reset ,input Wbit , input valid_input - /* */ ,input [2:0] IN_MOD, input [2:0] OUT_MOD, input memio_address_select, input [15:0] ProgCount, input [2:0] RM, output reg [`ERROR_BITS-1:0] ERROR , input write /*TODO: REMOVE!!*/ - /* */ ,input set_initial_values, output reg next_exec - /* PARAM */ ,input [15:0] PARAM1_INIT, input [15:0] PARAM2_INIT - /* STATE CONTROL */ ,input [`EXEC_STATE_BITS-1:0] init_state - /* ALU CONTROL */ ,input [1:0] in_alu_sel1, input [1:0] in_alu_sel2, input [`ALU_OP_BITS-1:0] ALU_OP, output [15:0] _ALU_O_ - /* REGISTER DATA */ ,input [15:0] reg_read_port1_data ,input [15:0] reg_read_port2_data, output reg [3:0] reg_read_port1_addr, output reg use_exec_reg_addr, output reg reg_write_we - /* FLAGS */ ,output reg [7:0] FLAGS - /* BIU */ ,output reg [15:0] BIU_ADDRESS_INPUT,output reg biu_write_request, output reg biu_read_request, input BIU_VALID_DATA, input [15:0] BIU_DATA, output reg biu_data_direction, output reg biu_jump_req - ); + /***************** GENERAL *****************/ + /* */ input clock, input reset, input write /*TODO: REMOVE!!*/, output reg [`ERROR_BITS-1:0] ERROR + + /*************** INPUT FROM DE ***************/ + /* SYNC SIGNALS */ ,input valid_input,input set_initial_values + /* INSTR. PARAMS */ ,input Wbit ,input [2:0] IN_MOD, input [2:0] OUT_MOD, input [2:0] RM + /* DATA */ ,input [15:0] PARAM1_INIT, input [15:0] PARAM2_INIT, input [15:0] ProgCount + /* STATE CONTROL */ ,input [`EXEC_STATE_BITS-1:0] init_state + /* ALU CONTROL */ ,input [1:0] in_alu_sel1, input [1:0] in_alu_sel2, input [`ALU_OP_BITS-1:0] ALU_OP, output [15:0] _ALU_O_ + /* OTHER */ ,input memio_address_select + + /**************** OUTPUT TO DE ****************/ + /* SYNC SIGNALS */ ,output reg next_exec + /* FLAGS */ ,output reg [7:0] EX2DE_FLAGS + + /**************** OUTPUT TO BIU ****************/ + /* */ ,output reg [15:0] BIU_ADDRESS_INPUT + /* */ ,output reg biu_read_request, output reg biu_jump_req,output reg biu_write_request + + /*************** INPUT FROM BIU ****************/ + /* */ ,input BIU_VALID_DATA, input biu_data_direction + + /************ BIDIRECTIONAL WITH BIU ***********/ + /* */ ,inout [15:0] BIU_DATA + + /***************** REGISTERS *****************/ + /* */ ,input [15:0] reg_read_port1_data ,input [15:0] reg_read_port2_data, output reg [3:0] reg_read_port1_addr + /* */ ,output reg use_exec_reg_addr, output reg reg_write_we +); assign _ALU_O_ = ALU_O; reg [`EXEC_STATE_BITS-1:0] exec_state; reg [15:0] PARAM1,PARAM2; +assign BIU_DATA = biu_data_direction ? (memio_address_select ? reg_read_port1_data : ALU_O): 16'hz; + /*############ ALU / Execution units ################################################## */ mux4 #(.WIDTH(16)) MUX16_1A( @@ -90,6 +111,7 @@ end always @(posedge reset) begin exec_state <= `EXEC_RESET; + next_exec <= 0; end `define unimpl_addressing_mode exec_state <= `EXEC_WAIT;ERROR <= `ERR_UNIMPL_ADDRESSING_MODE; @@ -101,7 +123,6 @@ always @(posedge clock) begin `EXEC_RESET: begin biu_write_request <= 0; biu_read_request <= 0; - biu_data_direction <= 0; biu_jump_req <= 0; reg_write_we <= 1; exec_state <= `EXEC_WAIT; @@ -111,6 +132,7 @@ always @(posedge clock) begin `EXEC_WAIT:begin reg_write_we <= 1; use_exec_reg_addr <= 0; + ERROR<=`ERR_NO_ERROR; end `EXEC_DE_LOAD_REG_TO_PARAM:begin PARAM2<=reg_read_port2_data; @@ -190,9 +212,7 @@ always @(posedge clock) begin exec_state <= `EXEC_WRITE_ENTRY; PARAM2 <= BIU_DATA; biu_read_request <= 0; - biu_data_direction <= 0; end else begin - biu_data_direction <= 1; biu_read_request <= 1; end end @@ -201,7 +221,7 @@ always @(posedge clock) begin /*necessary for biu to see we went on another state from decode to give us a new instruction*/ end `EXEC_WRITE_ENTRY:begin - FLAGS[7:0] <= ALU_FLAGS[7:0]; + EX2DE_FLAGS[7:0] <= ALU_FLAGS[7:0]; case(OUT_MOD) 3'b000, 3'b001, diff --git a/system/processor.v b/system/processor.v index 78abf51..9fdf5d1 100644 --- a/system/processor.v +++ b/system/processor.v @@ -1,4 +1,4 @@ -/* processor.v - implementation of most functions of the 9086 processor +/* processor.v - Connects the different modules comprising the processor This file is part of the 9086 project. @@ -29,15 +29,18 @@ //reset: active low module processor ( + /* MISC */ input clock, input reset, output wire HALT,output [`ERROR_BITS-1:0] ERROR /* MEMORY / IO */ ,output [19:0] external_address_bus, inout [15:0] external_data_bus,output read, output write,output BHE,output IOMEM + `ifdef CALCULATE_IPC /* STATISTICS */ ,output wire new_instruction `endif `ifdef OTUPUT_JSON_STATISTICS /* */ ,output wire [`L1_CACHE_SIZE-1:0] L1_SIZE_STAT, output wire VALID_INSTRUCTION_STAT, output wire jump_req_debug `endif - ); + +); `ifdef OTUPUT_JSON_STATISTICS @@ -50,121 +53,140 @@ assign ERROR=(DE_ERROR!=`ERR_NO_ERROR)?DE_ERROR:(EXEC_ERROR!=`ERR_NO_ERROR)?EXEC /*############ Execution Unit ################################################### */ -wire [1:0] in_alu_sel1, in_alu_sel2; -assign in_alu_sel1 = DE_OUTPUT[44:43]; -assign in_alu_sel2 = DE_OUTPUT[46:45]; - -wire valid_exec_data, set_initial_values; - wire [`ERROR_BITS-1:0] EXEC_ERROR; -wire use_exec_reg_addr; - +wire biu_read_request,biu_jump_req,biu_write_request,use_exec_reg_addr; wire [3:0] EXEC_reg_read_port1_addr; wire [15:0] ALU_O; -wire [7:0]EX2DE_FLAGS; - -wire [15:0] PARAM1_INIT, PARAM2_INIT; -assign PARAM1_INIT = DE_OUTPUT[23:8]; -assign PARAM2_INIT = DE_OUTPUT[39:24]; - -wire [2:0] IN_MOD,OUT_MOD; -assign IN_MOD=DE_OUTPUT[2:0]; -assign OUT_MOD=DE_OUTPUT[49:47]; - -wire [`ALU_OP_BITS-1:0] ALU_OP; -assign ALU_OP = DE_OUTPUT[42:40]; - +wire [7:0] EX2DE_FLAGS; +wire [15:0] BIU_ADDRESS_INPUT; +wire reg_write_we; wire next_exec; + execute_unit execute_unit ( - /* GENERAL */ clock, reset, Wbit, valid_exec_data - /* */ ,IN_MOD, OUT_MOD,memio_address_select, ProgCount, RM, EXEC_ERROR, write - /* */ ,set_initial_values,next_exec - /* PARAM */ ,PARAM1_INIT,PARAM2_INIT - /* STATE CONTROL */ ,next_state - /* ALU CONTROL */ ,in_alu_sel1, in_alu_sel2, ALU_OP, ALU_O - /* REGISTER DATA */ ,reg_read_port1_data, reg_read_port2_data, EXEC_reg_read_port1_addr, use_exec_reg_addr, reg_write_we - /* FLAGS */ ,EX2DE_FLAGS - /* BIU */ ,BIU_ADDRESS_INPUT, biu_write_request, biu_read_request, BIU_VALID_DATA, BIU_DATA, biu_data_direction, biu_jump_req - ); + /***************** GENERAL *****************/ + /* */ clock, reset, write, EXEC_ERROR + + /*************** INPUT FROM DE ***************/ + /* SYNC SIGNALS */ ,valid_exec_data,set_initial_values + /* INSTR. PARAMS */ ,Wbit, IN_MOD, OUT_MOD, RM + /* DATA */ ,PARAM1_INIT,PARAM2_INIT,ProgCount + /* STATE CONTROL */ ,next_state + /* ALU CONTROL */ ,in_alu_sel1, in_alu_sel2, ALU_OP, ALU_O + /* OTHER */ ,memio_address_select + + /**************** OUTPUT TO DE ****************/ + /* SYNC SIGNALS */ ,next_exec + /* FLAGS */ ,EX2DE_FLAGS + + /**************** OUTPUT TO BIU ****************/ + /* */ ,BIU_ADDRESS_INPUT + /* */ ,biu_read_request, biu_jump_req, biu_write_request + + /*************** INPUT FROM BIU ****************/ + /* */ ,BIU_VALID_DATA, BIU_DATA_DIR + + /************ BIDIRECTIONAL WITH BIU ***********/ + /* */ ,BIU_DATA + + /***************** REGISTERS *****************/ + /* */ ,reg_read_port1_data, reg_read_port2_data, EXEC_reg_read_port1_addr + /* */ ,use_exec_reg_addr, reg_write_we + +); /*############ Bus Interface Unit ############################################### */ -wire [15:0] INSTRUCTION_LOCATION, BIU_ADDRESS_INPUT; +wire [15:0] INSTRUCTION_LOCATION; wire [15:0] BIU_DATA; -wire [31:0] INSTRUCTION; -wire biu_write_request, biu_read_request, BIU_VALID_DATA; -wire biu_jump_req, biu_data_direction,VALID_INSTRUCTION; -wire VALID_INSTRUCTION_ACK; +wire [31:0] IF2DE_INSTRUCTION; +wire BIU_VALID_DATA; +wire VALID_INSTRUCTION; +wire BIU_DATA_DIR; BIU BIU( - /* Outside world */ clock,reset,external_address_bus - /* */ ,external_data_bus,read,write,BHE,IOMEM - /* Internal */ ,INSTRUCTION,VALID_INSTRUCTION,INSTRUCTION_LOCATION,biu_jump_req - /* */ ,BIU_ADDRESS_INPUT,BIU_DATA,biu_write_request,biu_read_request,Wbit,BIU_VALID_DATA,MEM_OR_IO - /* */ ,VALID_INSTRUCTION_ACK -`ifdef OTUPUT_JSON_STATISTICS - /* Statistics */ ,L1_SIZE_STAT, VALID_INSTRUCTION_STAT -`endif - ); + /***************** GENERAL *****************/ + /* */ clock,reset + + /**************** OUTSIDE WORLD ****************/ + /* */ ,external_address_bus + /* */ ,external_data_bus,read,write,BHE,IOMEM + + /**************** OUTPUT TO DE ****************/ + /* */ ,IF2DE_INSTRUCTION,VALID_INSTRUCTION,INSTRUCTION_LOCATION + /* */ ,BIU_VALID_DATA,BIU_DATA_DIR + + /**************** INPUT FROM DE ****************/ + ,Wbit,MEM_OR_IO,VALID_INSTRUCTION_ACK + + /**************** INPUT FROM EX ****************/ + /* */ ,biu_jump_req,biu_write_request,biu_read_request + /* */ ,BIU_ADDRESS_INPUT + + /************ BIDIRECTIONAL WITH EX ************/ + /* */ ,BIU_DATA + +`ifdef OTUPUT_JSON_STATISTICS + /***************** STATISTICS *****************/ + /* */ ,L1_SIZE_STAT, VALID_INSTRUCTION_STAT +`endif + +); -assign BIU_DATA= biu_data_direction ? 16'hz : (memio_address_select ? reg_read_port1_data : ALU_O); /*############ Decoder ########################################################## */ -/* verilator lint_off UNUSEDSIGNAL */ //TODO -wire [`EXEC_STATE_BITS+`ERROR_BITS+65:0] DE_OUTPUT; +wire [`ERROR_BITS-1:0] DE_ERROR; +wire valid_exec_data, set_initial_values, Wbit; +wire memio_address_select, MEM_OR_IO, VALID_INSTRUCTION_ACK; +wire [1:0] in_alu_sel1, in_alu_sel2; +wire [2:0] IN_MOD,OUT_MOD, RM; +wire [3:0] DE_reg_read_port1_addr,DE_reg_read_port2_addr, reg_write_addr; +wire [15:0] PARAM1_INIT, PARAM2_INIT, ProgCount; +wire [`ALU_OP_BITS-1:0] ALU_OP; +wire [`EXEC_STATE_BITS-1:0] next_state; decoder decoder( - /* GENERAL */ clock, reset, - /* INPUT FROM IF */ INSTRUCTION,VALID_INSTRUCTION,INSTRUCTION_LOCATION - /* INPUT FROM EX */ ,EX2DE_FLAGS[7:0],next_exec - /* OUTPUT TO EX */ ,DE_OUTPUT - /* */ ,ProgCount,set_initial_values,valid_exec_data - /* OUTPUT TO IF */ ,VALID_INSTRUCTION_ACK + /***************** GENERAL *****************/ + /* Input from sys. */ clock, reset + /* Output to sys. */ ,MEM_OR_IO, DE_ERROR, HALT + + /*************** INPUT FROM IF ***************/ + /* */ ,IF2DE_INSTRUCTION, VALID_INSTRUCTION + /* */ ,INSTRUCTION_LOCATION + + /*************** OUTPUT TO IF ***************/ + /* */ ,VALID_INSTRUCTION_ACK + + /*************** INPUT FROM EX ***************/ + /* */ ,EX2DE_FLAGS[7:0], next_exec + + /*************** OUTPUT TO DE ***************/ + /* SYNC SIGNALS */ ,set_initial_values, valid_exec_data + /* INSTR. PARAMS */ ,Wbit, IN_MOD, OUT_MOD, RM + /* DATA */ ,PARAM1_INIT, PARAM2_INIT, ProgCount + /* STATE CONTROL */ ,next_state + /* ALU CONTROL */ ,in_alu_sel1, in_alu_sel2, ALU_OP + /* OTHER */ ,memio_address_select + + /************* OUTPUT TO REGISTERS ************/ + /* */ , reg_write_addr,DE_reg_read_port2_addr, DE_reg_read_port1_addr + `ifdef CALCULATE_IPC - /* STATISTICS */ , new_instruction + /* STATISTICS */ , new_instruction `endif - ); -wire [2:0] RM; -assign RM = DE_OUTPUT[5:3]; - -wire memio_address_select; -assign memio_address_select=DE_OUTPUT[6:6]; - -wire [3:0] DE_reg_read_port1_addr,DE_reg_read_port2_addr; -assign DE_reg_read_port1_addr=DE_OUTPUT[53:50]; -assign DE_reg_read_port2_addr=DE_OUTPUT[57:54]; - -wire [3:0] reg_write_addr; -assign reg_write_addr=DE_OUTPUT[61:58]; - -wire MEM_OR_IO; -assign MEM_OR_IO = DE_OUTPUT[7:7]; - -wire Wbit; -assign Wbit=DE_OUTPUT[64:64]; - -wire [`ERROR_BITS-1:0] DE_ERROR; -assign HALT = DE_OUTPUT[65:65]; -assign DE_ERROR = DE_OUTPUT[`ERROR_BITS+65:66]; - -wire [`EXEC_STATE_BITS-1:0] next_state; -assign next_state=DE_OUTPUT[`EXEC_STATE_BITS+`ERROR_BITS+65:`ERROR_BITS+66]; +); /*############ Registers ######################################################## */ -wire [15:0] ProgCount; wire [3:0] reg_read_port1_addr; assign reg_read_port1_addr = use_exec_reg_addr ? EXEC_reg_read_port1_addr : DE_reg_read_port1_addr; wire [15:0] reg_read_port1_data, reg_read_port2_data; -wire reg_write_we; - register_file register_file( /* WRITE */ .write_port1_addr(reg_write_addr), /* */ .write_port1_data(ALU_O), diff --git a/system/system.v b/system/system.v index e348fc9..de26435 100644 --- a/system/system.v +++ b/system/system.v @@ -64,6 +64,7 @@ initial begin end else json_file_descriptor=0; `endif + sane=0; end //integer killswitch=0; @@ -118,7 +119,7 @@ always @(posedge clock) begin /* instruction_count gets updated at the sme time as HALT is pulled so wait a clock cycle to get an accurate reading*/ $display("\x1b[7mProcessor halted.\nCycles run for : %0d\x1b[m",cycles); `ifdef CALCULATE_IPC - /* verilator lint_off REALCVT */ + /* verilator lint_off REALCVT */ $display("\x1b[7mInstr. per cycle : %f\x1b[m", $itor(instruction_count) / $itor(cycles) ); /* verilator lint_on REALCVT */ `endif @@ -132,8 +133,12 @@ always @(posedge clock) begin endcase end +always @(posedge reset)begin + sane<=1; +end +reg sane; always @( ERROR ) begin - if ( ERROR != `ERR_NO_ERROR ) begin + if ( ERROR != `ERR_NO_ERROR && sane == 1 ) begin $display("PROCESSOR RUN INTO AN ERROR."); case (ERROR) default:begin